Multi-Task Timer & Clock

Instrument Range: 24 hours by hr/min/sec. Dual function. Memory. Counts up & down. Clock. Stopwatch. Loud and long alarm. Stop and restart. Lock.

Counts up after zero. Food-safe ABS plastic. Sliding mode switch. International time. 3-way mounting: pocket clip/magnet/stand. 1.5V Button IEC LR44 Alkaline included. Five year warranty. Size: 2.5 x 2-in. Product Instructions.

Slide switch on the right side to Clock to select clock mode. AM or PM appears on the display in 12-hour time. Press and hold the Clear button for 2 seconds to switch between 12-hour, AM/PM time, and 24-hour, international time. Press the HR MIN and/or SEC buttons to enter the desired time. Press and hold for fast advance. Slide switch on the right side to Timer to select the count down mode. Timer appears on the display. Press the Hr Min and/or Sec buttons to enter the desired time. Press and hold for fast advance. The timer retains any time showing on the display when the sliding mode switch is moved to another position. Press the Memory button to enter the set time into memory. Memory appears on the display. Press the Memory button to recall the set time. Press the Memory button, then press the Clear button, to clear the set time from memory.

Press the Start/Stop button to start counting down. Timer flashes on the display during count down when in other modes. Press the Start/Stop button to interrupt the count. Press Start/Stop again to resume the count. The alarm sounds and Times Up flashes on the display when the count reaches 0:0000. The timer counts up the overtime since reaching 0:0000. The maximum overtime is 10 hours. The alarm and flashing stop automatically after 60 seconds while the count up continues. Press Start/Stop to stop the alarm and the count up, and reset to 0:0000. Press Clear when timer is stopped to reset to 0:0000. Slide switch on the right side to Count Up to select the count up mode. Count Up appears on the display. Press the Start/Stop button to start counting up. Count Up flashes on the display during count up when in other modes. Press the Start/Stop button to interrupt the count. Press Start/Stop again to resume the count. Press Clear when timer is stopped to reset to 0:0000. The timer retains any time showing on the display when the sliding mode switch is moved to another position.

Because we understand that every customer's situation is different, we offer six options in Digital Thermometers, each with something special that will be ideal for a different environment. Please also see our wide variety of Digital Probe Thermometers. We specialize in time and temperature. At Component Design Northwest, Inc. (CDN), we offer more than 60 professional quality timers and thermometers for the household/commercial kitchen and other applications, with the broadest line available in the marketplace today.